Reverse osmosis membrane scale inhibitor, abbreviated as reverse osmosis scale inhibitor, is a membrane scale inhibitor dispersant used in reverse osmosis water treatment systems. After long-term rational use, it can effectively improve the quality and output of water production, extend the cleaning cycle and service life of the membrane, and reduce the production and operation costs of enterprises. Jiaming reverse osmosis membrane scale inhibitor customization can be produced based on the results of water quality testing and analysis, providing free on-site investigation and water sample extraction, and free water quality testing and analysis, Free sample trial, comprehensive technical support and service.

    The principle of reverse osmosis technology is to separate other substances from water under the action of osmotic pressure higher than the solution, based on the inability of other substances to penetrate the semi permeable membrane. Due to the very small pore size of the reverse osmosis membrane (only about 10A), it can effectively remove dissolved salts, colloids, microorganisms, organic matter, etc. in water (with a removal rate of up to 97% -98%). Reverse osmosis is currently the most widely used desalination technology in high-purity water equipment, which separates organic compounds with an ion range and molecular weight of several hundred in the solution; Reverse osmosis (RO), ultrafiltration (UF), microporous membrane filtration (MF), and electrodialysis (EDI) technologies all belong to membrane separation technologies.

    Customized reverse osmosis membrane scale inhibitors can be produced based on water quality testing and analysis results. The commonly used reverse osmosis scale inhibitor JM-192 by Jiaming is introduced below.

    Jiaming reverse osmosis scale inhibitor JM-192 product is a broad-spectrum and efficient scale inhibitor/dispersant used for membrane fouling in reverse osmosis equipment. Reverse osmosis scale inhibitor JM-192 product is an efficient liquid reverse osmosis membrane scale inhibitor used to control scaling deposits in membrane separation systems, effectively controlling calcium carbonate, calcium silicate, and calcium sulfate scales. Its scale inhibition efficiency is high and it does not form insoluble polymers with residual organic coagulants. Prevent scaling, improve water production and quality, and reduce operating costs in reverse osmosis (RO), nanofiltration (NF), or ultrafiltration (UF) systems without ion exchange pretreatment.

Jiaming high hardness water reverse osmosis scale inhibitor JM-191 is a wide scale and efficient barrier/dispersant used to interfere with membranes in reverse osmosis devices. BT0110 is an efficient scale inhibitor for reverse osmosis membranes, used to control scale deposition in membrane separation systems and effectively control scale formation in calcium carbonate, calcium silicate, and calcium sulfate. The inhibitory effect is high and it will not form polymers that cannot be swallowed together with residual organic coagulants. To prevent scale formation in reverse osmosis (RO), nanofiltration (NF), or ultrafiltration systems (UF) without ion pre-treatment exchange, improve water production and quality, and reduce operating costs.

    Jiaming Anti Osmosis Scale Inhibitor JM-192 is suitable for membrane types: Anti Osmosis Scale Inhibitor JM-192 is suitable for various imported domestic membranes and various types of systems, such as Dow. Filmtec, Hydranautics, Fluid Systems, TORAY, CSM, JOZZON, E-MEM, Vonton, Keensen, etc.

    Product features

    (1) Can be used in combination with organic flocculants;

    (2) Can be used for producing drinking water;

    (3) Effectively controlling the scaling of calcium carbonate, calcium sulfate, barium sulfate, and strontium sulfate, L S. I value 

up to 3.0 does not cause scaling;

    (4) All major reverse osmosis membranes can be used;

    (5) Maintaining a clean surface of the reverse osmosis membrane by dispersing and blocking particles;

    (6) The inlet pH is effective within the range of 5-9;

    (7) It can be added directly without dilution or after dilution;

    (8) Good tolerance to aluminum and iron oxides.

     Technical indicators:

    Appearance: Light yellow transparent liquid

    PH value (1% aqueous solution): 2.5 ± 1.0

    Density (20 ℃) g/cm ³： 1.10 ± 0.05

    Usage requirements:

    Dosing: The reverse osmosis scale inhibitor JM-192 product is continuously added to the inlet water before entering the 

membrane system. The typical dosage is 3-5 mg/l, which varies depending on the chemical properties of the water, membrane

 type, and system operating parameters (such as recovery rate, temperature, and pressure). The specific dosage will be 

calculated by the service provider.

    Dilution: The reverse osmosis scale inhibitor JM-192 product should be continuously added. It is recommended to dilute it 

with RO produced water or desalinated water, with a dilution ratio not exceeding 10.

    Note: Excessive or insufficient dosage can cause membrane fouling.

    Packaging and storage:

    Plastic barrel packaging, net weight of 25 kilograms per barrel; Shelf life: Store in a dark and cool place, valid for 1 year.

   Safety and Protection:

    Wear latex gloves, protective goggles, and protective clothing. If it splashes into the eyes, immediately rinse them with plenty 

of water and seek medical attention promptly. Prevent spillage on cement floors to prevent corrosion. If it corrodes the floor, 

please rinse immediately with clean water.